The Oak Factory

Arosa

Parquet flooring plank pattern oak Arosa
Thickness Oak layer Widths Lengths *
Relief 3D
16 mm
4 mm
180, 220, 250 mm
300 mm**
1.8 to 3 m
Country
12 mm
approx. 3 mm
140 mm
1.6 to 3 m
Country
16 mm
4 mm
180 & 220 mm
1.8 to 3 m
Classic
16 mm
4 mm
180 mm
1.8 to 3 m
Select
16 mm
4 mm
180 & 200 mm
1.8 to 3 m

Glue is approx. 1mm 
* depending on stock, with a maximum of 20 % starter lengths
** on request

Grades

Arosa is available in our different versions: Relief 3D, Country, Classic and Select.

Structure

We use birch plywood with waterproof glue as base material with a sawn, solid oak layer on top. The connection consists of a traditional tongue and groove system to avoid unpleasant creaking noises of click connections. The edges on the long side are slightly chamfered. For aesthetic reasons, we do not use a bevel on the front side, because it would make planks appear shorter, a very unwanted effect.

Finish

Arosa consists of two layers of the highest quality, traditionally produced water-based varnish. We do not use UV curing at all, which would significantly reduce production costs, but also entails major compromises in quality. The stain resistance of Arosa is extremely good. Even coffee, cola, wine or kernel oil cannot harm Arosa. However, we recommend removing liquids as quickly as possible.

Maintenance

Maintenance consists primarily of vacuuming and mopping up. Make sure to use vacuum cleaner attachments suitable for wood flooring. You can find our cleaning and care instructions → here.

Skirting boards

We manufacture color matching skirting boards for you.

Installation

We recommend full-surface gluing by trained professionals.

place of manufacture

We produce in Graz. The raw material comes from sustainable forestry in Eastern Europe. More about it: Environment.