The Oak Factory

Arezzo

Thickness Oak layer Widths Lengths *
Relief 3D
16 mm
4 mm
180, 220, 250 mm
300 mm**
1.8 to 3 m
Country
12 mm
approx. 3 mm
140 mm
1.6 to 3 m
Country
16 mm
4 mm
180 & 220 mm
1.8 to 3 m
Classic
16 mm
4 mm
180 mm
1.8 to 3 m
Select
16 mm
4 mm
180 & 200 mm
1.8 to 3 m

Glue is approx. 1mm 
* depending on stock, with a maximum of 20 % starter lengths
** on request

Grades

Arezzo is available in these grades: Relief 3D, Country, Classic and Select.

Structure

We use birch plywood with waterproof glue as base material with a sawn, solid oak layer on top. The connection is made with a traditional tongue and groove system to avoid unpleasant creaking noises of click connections. The edges on the long side are slightly chamfered. For aesthetic reasons, we do not use a bevel on the front side, because bevels on the front side make planks appear shorter, a very unwanted effect.

Finish

Arezzo consists of a layer of deeply penetrating, purely plant-based natural oils and a layer of oil seal reinforced with resins, dried solely by air. You can also refresh the oil seal yourself if necessary. The surface is basically maintenance-free in everyday use, which means that you do not have to constantly re-oil and also do not have to use floor soap every time to avoid visible soiling. The stain resistance of Arezzo is extremely good. Even coffee, cola, wine or cooking oil cannot harm Arezzo.

Maintenance

Maintenance consists primarily of vacuuming and mopping. Make sure that you use vacuum cleaner attachments that are suitable for parquet. You can find our cleaning and care instructions → here.

Skirting boards

We manufacture color matching skirting boards for you.

Installation

We recommend full-surface gluing by trained professionals.

Production

We finish our oak floors in Graz. Raw planks originate from sustainable forestry. More about this under: Environment.